|
|
|
|
|
|
ASR-2000系列可編程AC / DC電源(new) |
|
|
ASR-2000系列是面向系統集成或台式機應用的AC + DC電源,既提供AC輸出的額定功率輸出,也提供DC輸出的額定功率輸出。共有9種ASR-2000輸出模式,包括1)交流電源輸出模式(AC-INT模式),2)直流電源輸出模式(DC-INT模式),3)交流/直流電源輸出模式(AC + DC-INT)模式),4)外部AC信號源模式(AC-EXT模式),5)外部AC / DC信號源模式(AC + DC-EXT模式),6)外部AC信號疊加模式(AC-ADD模式),7 )外部AC / DC信號疊加模式(AC + DC-ADD模式),8)外部AC信號同步模式(AC-SYNC模式),9)外部AC / DC信號同步模式(AC + DC-SYNC模式)。 |
|
|
|
|
說明 |
|
特徵
-
輸出額定值:AC 0 – 350 Vrms,DC 0-±500 V
-
輸出頻率高達999.9 Hz
-
直流輸出(額定功率的100%)
-
測量項目:Vrms,Vavg,Vpeak,Irms,IpkH,Iavg,Ipeak,P,S,Q,PF,CF
-
電壓和電流諧波分析(THDv,THDi)
-
遙感能力
-
OVP,OCP,OPP,OTP,AC故障檢測和風扇故障警報。
-
支持任意波形功能
-
輸出容量:500VA / 1000VA
-
自定義相位角,用於輸出開/關
-
序列和模擬功能(最多10套)
ASR-2000系列是面向系統集成或台式機應用的AC + DC電源,既提供AC輸出的額定功率輸出,也提供DC輸出的額定功率輸出。共有9種ASR-2000輸出模式,包括1)交流電源輸出模式(AC-INT模式),2)直流電源輸出模式(DC-INT模式),3)交流/直流電源輸出模式(AC + DC-INT)模式),4)外部AC信號源模式(AC-EXT模式),5)外部AC / DC信號源模式(AC + DC-EXT模式),6)外部AC信號疊加模式(AC-ADD模式),7 )外部AC / DC信號疊加模式(AC + DC-ADD模式),8)外部AC信號同步模式(AC-SYNC模式),9)外部AC / DC信號同步模式(AC + DC-SYNC模式)。
ASR-2000系列為用戶提供波形輸出能力,以滿足不同電子元件開發,汽車電氣設備和家用電器的測試要求,其中包括:1)序列模式生成波形下降,電湧,下垂,變化和其他異常電源線狀況; 2)任意波形功能允許用戶存儲/上傳用戶定義的波形;和3)模擬模式模擬停電,電壓上升,電壓下降和頻率變化。當輸出ASR-2000系列電源時,它還可以測量Vrms,Vavg,Vpeak,Irms,Iavg,Ipeak,IpkH,P,S,Q,PF,CF,40階電壓諧波和電流諧波。此外,遙感功能可確保准確的電壓輸出。自定義輸出開/關相位角功能可以根據測試要求設置電壓輸出的起始角和終止角。V-Limit,Ipeak-Limit,F-Limit,OVP,OCP,OPP功能設置可以在測量過程中保護DUT。除了OTP,OCP和OPP保護外,ASR-2000系列還集成了風扇故障警報功能和AC故障警報功能。
ASR-2000的上升時間
|
ASR-2000的下降時間
|
上升時間從-500V到500V
|
下降時間從500V到-500V
|
|
|
產品規格 |
|
ASR-2000 Specifications
The specifications apply when the ASR-2000 is powered on for at least 30 minutes under +20°C~+30°C.
Input Ratings (AC rms)
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Norminal input voltage |
100 Vac to 240 Vac |
Input voltage range |
90 Vac to 264 Vac |
Phase |
Single phase, Two-wire |
Input frequency range |
47 Hz to 63 Hz |
Max. power consumption |
800 VA or less |
1500 VA or less |
Power factor*1 |
100Vac |
0.95 (typ.) |
200Vac |
0.90 (typ.) |
Max. input current |
100Vac |
8 A |
15 A |
200Vac |
4 A |
7.5 A |
*1. For an output voltage of 100 V/200 V (100V / 200V range), maximum current, and a load power factor of 1.
AC Mode Output Ratings (AC rms)
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Voltage |
Setting Range*1 |
0.0 V to 175.0 V / 0.0 V to 350.0 V |
Setting Resolution |
0.1 V |
Accuracy*2 |
±(0.5 % of set + 0.6 V / 1.2 V) |
Output phase |
Single phase, Two-wire |
Maximum current*3 |
100 V |
5 A |
10 A |
200 V |
2.5 A |
5 A |
Maximum peak current*4 |
100 V |
20 A |
40 A |
200 V |
10 A |
20 A |
Power capacity |
500 VA |
1000 VA |
Frequency |
Setting range |
AC Mode: 40.00 Hz to 999.9 Hz, AC+DC Mode: 1.00 Hz to 999.9 Hz |
Setting resolution |
0.01 Hz (1.00 to 99.99 Hz), 0.1 Hz (100.0 to 999.9 Hz) |
Accuracy |
For 45 Hz to 65 Hz: 0.01% of set
For 40 Hz to 999.9 Hz: 0.02% of set |
Stability*5 |
± 0.005% |
Output on phase |
0.0° to 359.9° variable (setting resolution 0.1°) |
DC offset*6 |
Within ± 20 mV (TYP) |
*1. 100 V / 200 V range
*2. For an output voltage of 17.5 V to 175 V / 35 V to 350 V, sine wave, an output frequency of 45 Hz to 65 Hz, no load, DC voltage setting 0V (AC+DC mode) and 23°C ± 5°C
*3. For an output voltage of 1 V to 100 V / 2 V to 200 V.
Limited by the power capacity when the output voltage is 100 V to 175 V / 200 V to 350 V.
*4. With respect to the capacitor-input rectifying load. Limited by the maximum current.
*5. For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the maximum current, and the operating temperature.
*6. In the case of the AC mode and output voltage setting to 0 V.
Output Rating for DC Mode
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Voltage |
Setting Range*1 |
-250 V to +250 V / -500 V to +500 V |
Setting Resolution |
0.1 V |
Accuracy*2 |
±(|0.5 % of set| + 0.6 V / 1.2 V) |
Maximum current*3 |
100 V |
5 A |
10 A |
200 V |
2.5 A |
5 A |
Maximum peak current*4 |
100 V |
20 A |
40 A |
200 V |
10 A |
20 A |
Power capacity |
500 W |
1000 W |
*1. 100 V / 200 V range
*2. For an output voltage of -250 V to -25 V, +25 V to +250 V / -500 V to -50 V, +50 V to +500 V, no load, AC volatge setting 0V (AC+DC mode) and 23 ℃
± 5 ℃
*3. For an output voltage of 1.4 V to 100 V / 2.8 V to 200 V.
Limited by the power capacity when the output voltage is 100 V to 250 V / 200 V to 500 V.
*4. Within 5 ms, Limited by the maximum current.
Output Voltage Stability
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Line regulation*1 |
±0.2% or less |
Load regulation*2 |
0.15% @45 - 65Hz
0.5% @DC, all other frequencies (0 to 100%, via output terminal) |
Ripple noise*3 |
0.7 Vrms / 1.4 Vrms (TYP) |
*1. Power source input voltage is 100 V, 120 V, or 230 V, no load, rated output.
*2. For an output voltage of 75 V to 175 V / 150 V to 350 V, a load power factor of 1, stepwise change from an output current of 0 A to maximum current (or its reverse), using the output terminal on the rear panel.
*3. For 5 Hz to 1 MHz components in DC mode using the output terminal on the rear panel.
Output Voltage Waveform Distortion Ratio, Output Voltage Response Time, Efficiency
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Output voltage waveform distortion ratio*1 |
0.5 % or less |
Output voltage response time*2 |
100 us (TYP) |
Efficiency*3 |
70 % or more |
*1. At an output voltage of 50 V to 175 V / 100 V to 350 V, a load power factor of 1, and in AC and AC+DC mode.
*2. For an output voltage of 100 V / 200 V, a load power factor of 1, with respect to stepwise change from an output current of 0 A to the maximum current (or its reverse). 10% ~ 90% of output voltage
*3. For AC mode, at an output voltage of 100 V / 200 V, maximum current, and load power factor of 1 and sine wave only.
Measured Value Display
All accuracy of the measurement function is indicated for 23 °C±5 °C.
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Voltage |
RMS, AVG
value*1 |
Resolution |
0.1 V |
Accuracy*2 |
For 45 Hz to 65 Hz and DC: ±(0.5 % of reading + 0.3 V / 0.6 V) For 40 Hz to 999.9 Hz: ±(0.7 % of reading + 0.9 V / 1.8 V) |
|
PEAK
value |
Resolution |
0.1 V |
Accuracy |
For 45 Hz to 65 Hz and DC: ±(|2 % of reading| + 1 V / 2 V) |
Current |
RMS, AVG
value |
Resolution |
0.01 A |
Accuracy*3 |
For 45 Hz to 65 Hz and DC:
±(0.5 % of reading + 0.02 A / 0.02 A) For 40 Hz to 999.9 Hz:
±(0.7 % of reading + 0.04 A / 0.04 A) |
For 45 Hz to 65 Hz and DC:
±(0.5 % of reading + 0.04 A / 0.02 A)
For 40 Hz to 999.9 Hz:
±(0.7 % of reading + 0.08 A / 0.04
A) |
PEAK
value |
Resolution |
0.1 A |
Accuracy*4 |
For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 0.2 A / 0.1 A) |
For 45 Hz to 65 Hz and DC:
±(|2 % of reading| + 0.2 A / 0.1 A) |
Power |
Active (W) |
Resolution |
0.1 / 1 W |
Accuracy*5 |
±(2 % of reading + 0.5 W) |
±(2 % of reading + 1 W) |
Apparent (VA) |
Resolution |
0.1 / 1 VA |
Accuracy*5*6 |
±(2 % of reading + 0.5 VA) |
±(2 % of reading + 1 VA) |
Reactive (VAR) |
Resolution |
0.1 / 1 VAR |
Accuracy*5*7 |
±(2 % of reading + 0.5 VAR) |
±(2 % of reading + 1 VAR) |
Load power factor |
Range |
0.000 to 1.000 |
Resolution |
0.001 |
Load crest factor |
Range |
0.00 to 50.00 |
Resolution |
0.01 |
Harmonic voltage Effective value (rms) Percent (%)
(AC-INT and 50/60 Hz
only) |
Range |
Up to 40th order of the fundamental wave |
Full Scale |
175 V / 350 V, 100% |
Resolution |
0.1 V, 0.01% |
Accuracy*8 |
Up to 20th
±(0.2 % of reading + 0.5 V / 1 V) 20th to 40th
±(0.3 % of reading + 0.5 V / 1 V) |
Harmonic current Effective value (rms) Percent (%)
(AC-INT and 50/60 Hz
only) |
Range |
Up to 40th order of the fundamental wave |
Full Scale |
5 A / 2.5 A, 100% |
10 A / 5 A, 100% |
Resolution |
0.01 A, 0.01% |
Accuracy*3 |
Up to 20th
±(1 % of reading + 0.1 A / 0.05 A) 20th to 40th
±(1.5 % of reading + 0.1 A / 0.05 A) |
Up to 20th
±(1 % of reading + 0.2 A / 0.1 A) 20th to 40th
±(1.5 % of reading + 0.2 A / 0.1 A) |
*1. The voltage display is set to RMS in AC/AC+DC mode and AVG in DC mode.
*2. AC mode: For an output voltage of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C. DC mode: For an output voltage of 25 V to 250 V / 50 V to 500 V and 23 °C ± 5 °C.
*3. An output current in the range of 5 % to 100 % of the maximum current, and 23 °C ± 5 °C.
*4. An output current in the range of 5 % to 100 % of the maximum peak current in AC mode, an output current in the range of 5 % to 100 % of the maximum instantaneous current in DC mode, and 23 °C ± 5 °C. The accuracy of the peak value is for a waveform of DC or sine wave
*5. For an output voltage of 50 V or greater, an output current in the range of 10 % to 100 % of the maximum current, DC or an output frequency of 45 Hz to 65 Hz, and 23 °C ± 5 °C.
*6. The apparent and reactive powers are not displayed in the DC mode.
*7. The reactive power is for the load with the power factor 0.5 or lower.
*8. An output voltage in the range of 17.5 V to 175 V / 35 V to 350 V and 23 °C ± 5 °C.
Others
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Protections |
OCP, OTP, OPP, FAN Fail |
Display |
TFT-LCD, 4.3 inch |
Memory Function |
10 sets for Store and Recall settings |
Arbitrary Wave |
Number of memories |
16 (nonvolatile) |
Waveform length |
4096 words |
General Specifications
Model |
ASR-2050/ASR-2050R |
ASR-2100/ASR-2100R |
Interface |
Standard |
USB |
Type A: Host, Type B: Slave, Speed: 1.1/2.0, USB-CDC |
LAN |
MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask |
EXT Control |
External Signal Input External Control I/O |
Factory Optional |
GPIB |
SCPI-1993, IEEE 488.2 compliant interface |
RS-232C |
Complies with the EIA-RS-232 specifications |
Insulation resistance |
Between input and chassis, output and chassis, input and
output |
500 Vdc, 30 MΩ or more |
Withstand voltage |
Between input and chassis,
output and chassis, input and output |
1500 Vac, 1 minute |
EMC |
EN 61326-1 (Class A)
EN 61326-2-1/-2-2 (Class A)
EN 61000-3-2 (Class A, Group 1)
EN 61000-3-3 (Class A, Group 1)
EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 (Class A, Group 1)
EN 55011 (Class A, Group1) |
Safety |
EN 61010-1 |
Environment |
Operating environment |
Indoor use, Overvoltage Category II |
Operating temperature range |
0 °C to 40 °C |
Storage temperature range |
-10 °C to 70 °C |
Operating humidity range |
20 %rh to 80 % RH (no condensation) |
Storage humidity range |
90 % RH or less (no condensation) |
Altitude |
Up to 2000 m |
Dimensions (mm) |
ASR-2000: 285(W)×124(H)×480(D) (not including protrusions) ASR-2000R: 213(W)×124(H)×480(D) (not including protrusions) |
Weight |
ASR-2000: Approx. 11.5 kg ASR-2000R: Approx. 10.5 kg |
External Signal Input (AC+DC-EXT, AC-EXT Mode)
|
Specification |
Factory Default |
Gain setting range |
100 V range: 0.0 to 250.0 times |
100 |
200 V range: 0.0 to 500.0 times |
200 |
Input terminal |
BNC connector |
1 MΩ |
Input voltage range |
±2.5 V (A/D resolution 12 bit) |
±10 V |
Gain resolution |
0.1 times |
±5 %
(DC, or 45Hz ~ 65 Hz, gain is at initial value, with rate voltage output, no load) |
EXT: Output voltage (V) = External signal input (V) x Gain (V/V)
External Signal Input (AC+DC-ADD, AC-ADD Mode)
|
Specification |
Factory Default |
Gain setting range |
100 V range: 0.0 to 250.0 times |
100 |
200 V range: 0.0 to 500.0 times |
200 |
Input terminal |
BNC connector |
1 MΩ |
Input voltage range |
±2.5 V (A/D resolution 12 bit) |
±10 V |
Input frequency range |
DC to 999.9 Hz (sine wave)
DC to 100 Hz (other than sine wave) |
0.1 times |
Accuracy |
±5 %
(DC, or 45Hz ~ 65 Hz, gain is at initial value, with rate voltage output, no
load) |
ADD: Output voltage (V) = External signal input (V) x Gain (V/V) + Internal signal source setting (V)
External Synchronous Signal or Line (AC+DC-SYNC, AC-SYNC)
|
Specification |
Factory Default |
Synchronization signal source |
External synchronization signal (EXT) or
Power input (LINE) |
LINE |
40.00 Hz to 999.9 Hz |
Input terminal |
BNC connector |
1 MΩ |
Threshold of input voltage |
TTL level |
500 us |
Nondestructive maximum input voltage |
±10 V |
0.1 Hz |
Accuracy |
±0.2 Hz |
|
|
|
|