|
|
|
|
|
|
1 GHz數位示波器GDS-3102A & GDS-3104A |
|
 |
全新數位示波器旗艦產品GDS-3102A、GDS-3104A，提供1 GHz頻寬，具備高達5 GSa/s即時取樣率與每通道200 M點的記憶長度，並搭配10.2吋顯示器，讓工程師可以更容易地觀察待測訊號的細節。
電源分析套件，提供豐富的13項量測功能，協助工程師用於電源品質、切換損耗、諧波失真、漣波、湧浪電流、調變分析、安全工作區域、負載瞬態、電源效率、B-H曲線、控制迴路分析、電源供應器抑制比與電源開/關分析等。透過內建頻率響應分析（FRA）APP，藉由控制迴路分析功能，工程師即可有效地進行相關設計、校驗、驗證與測試。
|
|
|
|
|
|
 說明 |
 |
全新數位示波器旗艦產品GDS-3102A、GDS-3104A，提供1 GHz頻寬，具備高達5 GSa/s即時取樣率與每通道200 M點的記憶長度，並搭配10.2吋顯示器，讓工程師可以更容易地觀察待測訊號的細節。
電源分析套件，提供豐富的13項量測功能，協助工程師用於電源品質、切換損耗、諧波失真、漣波、湧浪電流、調變分析、安全工作區域、負載瞬態、電源效率、B-H曲線、控制迴路分析、電源供應器抑制比與電源開/關分析等。透過內建頻率響應分析（FRA）APP，藉由控制迴路分析功能，工程師即可有效地進行相關設計、校驗、驗證與測試。
除了提供示波器時域信號的多種量測功能，還提供了1M點FFT分析與雙通道頻譜分析功能，可同時觀察示波器兩個通道上的頻譜，可個別設定中心頻率、頻率範圍以及解析度頻寬。內建的光譜圖（Spectrogram）功能，提供了頻域成份在時間上的變異分析，簡便的功能操作與優異的運算性能，協助工程師能快速針對其設計的時域與頻域信號，進行量測與除錯。
搭配I2C/SPI/UART/CAN/LIN串列匯流排觸發與解碼功能、25 MHz任意/函數產生器和DVM/頻率計數器，並內建固緯精心研製的電源插座，可供電給GCP-530/1030(DC-50/100MHz)或同類型電流探棒。工程師直接將電流探棒連接內建的供應電源插座即可正常使用，不需額外購買昂貴的電源供應器，也可免除外出時攜帶的負擔。
具備RS232/USB/Ethernet與選配的GPIB等多種連接介面與完整的遠端控制命令，適用於系統整合商建置各類自動化量測系統。靈活的遠程Web控制功能，可讓工程師在遠端透過網路與瀏覽器輕鬆的操控與觀察示波器畫面，具備多樣操作模式。
可選配1G取樣率16個數位輸入通道的邏輯分析儀，用於混合訊號分析，不論是對教育界的研究實驗室、還是電子產業研發工程師來說，都是市場上高性價比數位示波器的最佳選擇。
|
GDS-3102A |
通道 |
2 + Ext |
|
|
頻寬 |
DC to 1 GHz (–3dB) @ 50Ω input impedance
DC to 500 MHz (–3dB) @1MΩ input impedance |
|
|
上升時間 |
350 ps (calculated) |
|
|
頻寬限制 |
20 MHz/100 MHz/200 MHz/350 MHz* |
|
GDS-3104A |
通道 |
4 + Ext |
|
|
頻寬 |
DC to 1 GHz (–3dB) @50 Ω/1 MΩ input impedance |
|
|
上升時間 |
350 ps (calculated) |
|
|
頻寬限制 |
20 MHz/100 MHz/200 MHz/350 MHz* |
|
* 頻寬限制的公差為 ±10%。 |
|
垂直靈敏度 |
解析度 |
8 bits (Max.12 bits with Hi Res)
For 1MΩ input impedance: 1mV* to 10V/div
For 50Ω input impedance: 1mV* to 1V/div |
|
輸入耦合方式 |
AC, DC, GND |
|
輸入阻抗 |
1 MΩ// 22 pF approx. |
|
直流增益精度 |
1 mV: ±5 % full scale
≥2 mV: ±3 % full scale |
|
極性 |
Normal & Invert |
|
最大輸入電壓 |
For 1 MΩ input impedance: 300Vrms, CAT II
For 50 Ω input impedance: 5Vrms max. |
|
偏移位置範圍 |
For 1 MΩ input impedance:
1 mV/div to 20 mV/div :±1 V; 50 mV/div to 500 mV/div: ±10 V
1 V/div to 5 V/div : ±100 V; 10 V/div : ±1000 V
For 50 Ω input impedance:
1 mV/div to 50 mV/div:±1 V; 100 mV/div to 1 V/div : ±10 V |
|
波形信號處理 |
+, -, ×, ÷, FFT, User Defined Expression
FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning or Blackman. |
|
觸發 |
觸發源 |
CH1, CH2, CH3**, CH4**, Line, EXT |
|
觸發模式 |
Auto (supports Roll Mode for 100ms/div and slower), Normal, Single |
|
觸發類型 |
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Timeout, Alternate, Event-Delay(1~65535 events), Time-Delay(Duration, 4 ns~10 s), Bus (UART, I2C, SPI, CAN, LIN) |
|
Holdoff 範圍 |
4 ns to 10 s |
|
耦合方式 |
AC, DC, LF rej., Hf rej., Noise rej. |
|
靈敏度 |
1div |
|
外部觸發 |
Range |
±20 V |
|
靈敏度 |
DC to 100 MHz Approx. 100 mV
100 MHz to 350 MHz Approx. 150 mV |
|
輸入阻抗 |
1 MΩ±3 % ~22 pF |
*: The bandwidth is limited to 20 MHz at 1 mV/div and 2 mV/div.
**: For 4 CH models only. |
|
水準 |
水準時基範圍 |
1 ns/div to 1000 s/div (1-2-5 increments)
ROLL: 100 ms/div to 1000 s/div |
|
預觸發 |
10 div maximum |
|
後觸發 |
10,000,000 div maximum. |
|
時基精度 |
±5 ppm, about ±2 ppm increase in error per year |
|
信號採集 |
即時取樣速率 |
5 GSa/s half channels;
2.5 GSa/s all channels |
|
記錄長度 |
Max. 200 Mpts /CH |
|
採集模式 |
Normal, Average, High Resolution, Peak Detect, Single |
|
|
峰值檢測 |
400 ps (typical) |
|
|
平均值 |
Selectable from 2 to 256 |
|
|
分段數量 |
1 to 490,000 maximum |
|
X-Y Mode |
X-Axis輸入 |
Channel 1, Channel 3 (for 4CH models) |
|
Y-Axis輸入 |
Channel 2, Channel 4 (for 4CH models) |
|
相移 |
±3° at 100 kHz |
|
游標與測量 |
游標 |
Amplitude, Time, Gating available;
Unit: Seconds(s), Hz (1/s), Phase (degree), Ratio (%). |
|
自動測量 |
38 sets with indicator: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, %Flicker, Flicker Idx ,FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase. |
|
游標測量 |
Voltage difference between cursors(∆V)
Time difference between cursors(∆T) |
|
自動計數器 |
6 digits, range from 2Hz minimum to the rated bandwidth |
|
控制台功能 |
自動設置 |
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with “Undo Autoset”, “Fit Screen”/ “AC Priority” mode, and “Fine Scale” functions. |
|
保存設置 |
20 sets |
|
保存波形 |
20 sets |
|
|
保存參考波形 |
4 sets |
|
電源測量(選配) |
Power Quality, Harmonics, Ripple, In-rush current, Switching Loss, Modulation, SOA, Transient, Efficiency, B-H curve, Control Loop Response, PSRR, Turn On/Off |
|
AWG |
通用 |
|
|
通道數 |
2 |
|
取樣速率 |
200 MSa/s |
|
垂直解析度 |
14 bits |
|
最高頻率 |
25 MHz |
|
波形 |
Sine, Square, Pulse, Ramp, DC, Noise
Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac |
|
輸出範圍 |
20 mVpp to 5 Vpp, HighZ;
10 mVpp to 2.5 Vpp, 50Ω |
|
輸出解析度 |
1mV |
|
輸出精度 |
2 % (1 kHz) |
|
偏移範圍 |
±2.5 V, HighZ; ±1.25 V, 50 Ω |
|
偏移解析度 |
1mV |
|
正弦波 |
|
|
頻率範圍 |
100 mHz to 25 MHz |
平坦度
(relative to 1 kHz) |
±0.5 dB < 15 MHz;
±1dB 15 MHz to 25 MHz |
|
諧波失真 |
-40 dBc |
|
雜散（非諧波）失真 |
-40 dBc |
|
總諧波失真 |
1% |
|
信噪比 |
40 dB |
|
方波 / 脈衝波 |
|
|
頻率範圍 |
Square: 100 mHz to 15 MHz |
|
上升 / 下降時間 |
< 15ns |
|
過衝量 |
< 3 % |
|
占空比 |
Square: 50%
Pulse: 0.4% to 99.6% |
|
最小脈衝寬度 |
30 ns |
|
抖動 |
500 ps |
|
鋸齒波 |
|
|
頻率範圍 |
100 mHz to 1MHz |
|
線性度 |
1% |
|
對稱性 |
0 to 100% |
|
頻譜分析儀 |
頻率範圍 |
DC to 2.5 GHz Max, dual channel with spectrogram (based on Advanced FFT).
Notice: Frequency which exceeds analog front end bandwidth is uncalibrated |
|
掃寬 |
1 kHz to 2.5 GHz (Max.) |
|
解析度頻寬 |
1 Hz to 2.5 MHz (Max.) |
|
參考電平 |
-80 dBm to +40 dBm in steps of 5 dBm |
|
垂直單位 |
dBV RMS; Linear RMS; dBm |
|
垂直位置 |
-12divs to +12divs |
|
垂直刻度 |
1 dB/div to 20 dB/div in a 1-2-5 Sequence |
|
顯示平均雜訊電平 |
1 V/div ß -40 dBm, Avg :16
100 mV/div ß -60 dBm, Avg :16
10 mV/div ß -80 dBm, Avg :16 |
|
雜散回應 |
2nd harmonic distortion < 35 dBc
3rd harmonic distortion < 40 dBc |
|
頻域跡線類型 |
Normal; Max Hold; Min Hold; Average (2 to 256) |
|
檢測方法 |
Sample; +Peak; -Peak; Average |
|
FFT 窗函數 |
FFT Factor:
Hanning 1.44
Rectangular 0.89
Hamming 1.30
Blackman 1.68 |
|
邏輯分析儀(選配) |
取樣速率 |
1 GSa/s |
|
頻寬 |
200 MHz |
|
記錄長度 |
Per Channel 10M points (max) |
|
輸入通道 |
16 Digital (D15 - D0) |
|
觸發類型 |
Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART, CAN, LIN), Parallel Bus |
|
Thresholds Quad |
Settable thresholds for:
D0-D3, D4-D7, D8-11, D12-15 |
|
閾值選擇 |
TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined |
|
用戶自訂閾值範圍 |
±5 V |
|
最大輸入電壓 |
±40 V |
|
最小電壓擺幅 |
±250 mV |
|
垂直解析度 |
1 bit |
|
頻率回應分析儀 |
頻率範圍 |
20 Hz to 25 MHz |
|
輸入與輸出源 |
Channel 1 to 2 for 2CH models
Channel 1 to 4 for 4CH models |
|
測試點數 |
10, 15, 30, 45, 90 points per decade selectable for logarithm scale;
2 ~ 1000 points selectable for linear scale |
|
動態範圍 |
> 80 dB (typical) |
|
測試幅度 |
10 mVpp to 2.5 Vpp into 50 Ω, 20 mVpp to 5 Vpp into High-Z, Fixed test amplitude or custom amplitude for each decade. |
|
測試結果 |
Logarithmic or linear overlaid gain and phase plot, may also overlay with reference plots for cross comparison. Test results saved in csv format for offline analysis. |
|
手動測量 |
Tracking gain and phase markers |
|
圖形縮放 |
Auto-scaled during test |
|
顯示 |
TFT LCD類型 |
10.2" TFT LCD WVGA color display |
|
顯示解析度 |
800 horizontal × 480 vertical pixels (WVGA) |
|
插值 |
Sin(x)/x |
|
波形顯示 |
Dots, vectors, variable persistence (16 ms to 4 s), infinite persistence, gray or color waveforms. |
|
波形更新率 |
200,000 waveforms per second, maximum |
|
顯示刻度線 |
8 x 10 divisions |
|
顯示模式 |
YT, XY |
|
介面 |
USB 埠 |
USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 |
|
乙太網埠(LAN) |
RJ-45 connector X1, 10/100 Mbps with HP Auto-MDIX |
|
Go-NoGo BNC |
5 V Max/10 mA open collector output X1 |
|
|
電源插座 |
±12 V / 600 mA for current probe use.
Two sets of power supply receptacles for 2CH models;
Four sets of power supply receptacles for 4CH models. |
|
|
RS232C |
DB-9 male connector X1 |
|
|
VGA視訊連接埠 |
DB-15 female connector X1, monitor output for display on VGA monitor |
|
|
選配GPIB 模組 |
Fully programmable with IEEE488-2 compliance |
|
|
Kensington Style Lock |
Rear-panel security slot connects to standard Kensington-style lock. |
|
Miscellaneous |
多語言功能表 |
Available |
|
工作環境 |
Temperature: 0 °C to 50 °C. Relative Humidity ≤ 80 % at 40 °C or below;
≤ 45 % at 41 °C to 50 °C. |
|
線上說明 |
Available |
|
時鐘 |
Time and Date, Provide the Date/Time for saved data |
|
內置快閃記憶體盤 |
800 M bytes Single-Level Cell flash memory |
|
已安裝應用程式 |
Go/NoGo, DVM, DataLog, Digital Filter, Frequency Response Analyzer, Mask, Mount Remote Disk, Demo |
|
|
使用者自訂按鍵 |
User can select one of the several different preset functions as shortcut key. |
|
|
電源電壓範圍 |
AC 100 V to 240 V, 50 Hz to 60 Hz, auto selection. power consumption:100 W |
|
|
重量 |
Approx. 4.6 kg |
|
|
尺寸 |
420 mm(W)X 253 mm(H)X 113.8 mm(D) |
|
|
| 產品規格 |
|
|
SPECIFICATIONS |
|
|
GDS-3102A |
GDS-3104A |
|
VERTICAL |
Channels |
2 CH+EXT |
4 CH+EXT |
Bandwidth
Calculated Rise Time Bandwidth Limit |
DC to 1 GHz (-3 dB)@50 Ω
input impedance;
DC to 500 MHz (-3 dB)@1 MΩ
input impedance 350 ps
20 MHz/100 MHz/200 MHz/350 MHz*1 |
Vertical Resolution
Input Coupling Input Impedance DC Gain Accuracy Polarity
Maximum Input Voltage(1 MΩ) Maximum Input Voltage(50 Ω) Offset Position Range
Waveform Signal Process |
8 bits, (Max.12 bits with Hi Res) *1. The tolerance of bandwidth limit is ± 10 %.
For 1 MΩ input impedance : 1 mV*2 to 10 V/div *2. The bandwidth is limited to 20 MHz at 2 mV/div or below; For 50 Ω input impedance:1 mV*2 to 1 V/div The bandwidth is limited to 900 MHz at 5 mV/div
AC, DC, GND
1 MΩ// 22 pF approx.
1 mV : ±5 % full scale ; ≥2 mV : ±3 % full scale Normal , Invert
300 Vrms, CAT II
5 Vrms
For 1 MΩ input impedance : 1 mV/div to 20 mV/div : ±1 V; 50 mV/div to 500 mV/div : ±10 V ; 1 V/div to 5 V/div: ±100 V ;
10 V/div: ±1000 V For 50 Ω input impedance : 1 mV/div to 50 mV/div : ±1 V ; 100 mV/div to 1 V/div: ±10 V
+, - x, ÷FFT, User Defined Expression FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning or Blackman |
|
TRIGGER |
Source Trigger Mode Trigger Type
Trigger Holdoff Range Coupling
Sensitivity |
2 CH model: CH1, CH2, Line , EXT ; 4 CH model: CH1 , CH2 , CH3 , CH4 , Line , EXT
Auto(Supports Roll Mode for 100 ms/div and slower), Normal, Single
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope),Time out, Alternate, Event-Delay(1 to 65,535 events), Time-Delay (Duration, 4 ns to 10 s), Bus(I2C,SPI,UART,CAN,LIN)
4 ns to 10 s
AC, DC, LF rej. , HF rej. , Noise rej. 1 div |
|
EXT TRIGGER |
Range Sensitivity
Input Impedance |
±20 V
DC to 100 MHz Approx. 100 mV ; 100 MHz to 350 MHz Approx. 150 mV
1 MΩ ± 3 % // 22 pF |
|
HORIZONTAL |
Range
Pre-trigger Post-trigger Accuracy |
1 ns/div to 1000 s/div (1-2-5 increments); ROLL : 100 ms/div to 1000 s/div
10 div maximum
10,000,000 div max ( depend on time base )
±5 ppm, about ±2 ppm increase in error per year |
|
X-Y MODE |
X-Axis Input/Y-Axis Input Phase Shift |
Channel 1, Channel 3 (for 4 CH model); Channel 2, Channel 4 (for 4 CH model)
±3° at 100 kHz |
|
SIGNAL ACQUISITION |
Real Time Sample Rate Record Length Acquisition Mode Number of Segments |
5 GSa/s half channels; 2.5 GSa/s all channels Max.200 Mpts/CH
Normal, Average, Peak detect, High resolution, Single ; Average: Selectable from 2 to 512, Peak detect: 400 ps 1 to 490,000 maximum |
|
CURSORS AND MEASUREMENT |
Cursors Automatic Measurement
Cursors Measurement Auto Counter |
Amplitude, Time, Gating available; Unit:Seconds(s), Hz(1/s), Phase(degree), Ratio(%)
38 sets with indicator: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges,
  -Edges, %Flicker, Flicker Idx ,FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase Voltage difference between cursors ( V) Time difference between cursors ( T) 6 digits, range from 2 Hz minimum to the rated bandwidth |
|
CONTROL PANEL FUNCTION |
Autoset
Save Setup Save Waveform
Save Reference Waveform |
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with “Undo Autoset”, “Fit Screen”/ “ AC Priority” mode, and “Fine Scale” functions.
20 sets
20 sets
4 sets |
POWER MEASUREMENTS
(Option) |
|
Power Quality, Harmonics, Ripple, In-rush current, Switching Loss, Modulation, SOA, Transient, Efficiency, B-H curve, Control Loop Response, PSRR, Turn On/Off |
|
AWG |
Channels Sample Rate
Vertical Resolution Max. Frequency Waveforms Output Range Output Resolution Output Accuracy Offset Range Offset Resolution Sine
Square/Pulse Ramp |
2
200 MSa/s
14 bits
25 MHz
Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaston, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac 20 mVpp to 5 Vpp, HighZ; 10 mVpp to 2.5 Vpp, 50 Ω
1 mV
2 % (1 kHz)
±2.5 V, High Z; ±1.25 V, 50 Ω
1 mV
Frequency Range:100 mHz to 25 MHz; Flatness(relative to 1 kHz): ± 0.5 dB < 15 MHz, ±1 dB (15 MHz to 25 MHz); Harmonic Distortion:-40 dBc; Stray(Non-harmonic):-40 dBc; Total Harmonic Distortion: 1 % ; S/N Ratio:40 dB
Frequency Range:100 mHz to 15 MHz ; Rise/Fall time: <15 ns ; Overshoot: <3 % ; Duty cycle Square:50 % & Pulse:0.4 % to 99.6 % ; Min. Pulse Width:30 ns ; Jitter:500 ps
Frequency Range:100 mHz to 1 MHz ; Linearity: 1 % ; Symmetry: 0 % to 100 % |
|
SPECTRUM ANALYZER |
Frequency Range
Span
Resolution Bandwidth Reference Level Vertical Units
Vertical Position Vertical Scale
Display Average Noise Level Spurious Response
Frequency Domain Trace Types Detection Methods
FFT Windows |
DC to 2.5 GHz(Max.) dual channel with spectrogram (based on advanced FFT). Notice: Frequency which exceeds analog front end bandwidth is uncalibrated
1 kHz to 2.5 GHz(Max.)
1 Hz to 2.5 MHz(Max.)
-80 dBm to +40 dBm in steps of 5 dBm dBV RMS; Linear RMS; dBm
-12 divs to +12 divs
1 dB/div to 20 dB/div in a 1-2-5 Sequence
1 V/div < -40 dBm, Avg : 16 ; 100 mV/div < -60 dBm, Avg : 16 ; 10 mV/div < -80 dBm, Avg : 16 2nd harmonic distortion < 35 dBc ; 3rd harmonic distortion < 40 dBc
Normal ; Max Hold ; Min Hold ; Average (2 to 256) Sample ; +Peak ; -Peak ; Average
FFT Factor : Hanning 1.44 ; Rectangular 0.89 ; Hamming 1.30 ; Blackman 1.68 |
|
SPECIFICATIONS |
|
LOGIC |
Sample Rate |
Per Channel 1G Sa/s |
ANALYZER
(Option) |
Bandwidth
Record Length Input Channels |
200 MHz
Per Channel 10 M pts (max) 16 Digital (D15 to D0) |
|
|
Trigger Type |
Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART, CAN, LIN), Parallel Bus |
|
|
Thresholds Quad |
Settable thresholds for: D0 to D3, D4 to D7,D8 to D11 ,D12 to D15 |
|
|
Threshold Selections |
TTL, CMOS(5 V,3.3 V,2.5 V), ECL, PECL,0 V ,User Defined |
|
|
User-defined Threshold Range |
±5 V |
|
|
Maximum Input Voltage |
±40 V |
|
|
Minimum Voltage Swing |
±250 mV |
|
|
Vertical Resolution |
1 bit |
|
FREQUENCY RESPONSE ANALYSIS |
Frequency Range
Input and Output Sources Number of Test Points Dynamic Range
Test Amplitude Test Results
Manual Measurements Plot Scaling |
20 Hz to 25 MHz
Channel 1 to 2 for 2 CH model ; Channel 1 to 4 for 4 CH model
10, 15, 30, 45, 90 points per decade selectable for logarithm scale; 2 to 1000 points selectable for linear scale
> 80 dB (typical)
10 mVpp to 2.5 Vpp into 50 Ω, 20 mVpp to 5 Vpp into High-Z, Fixed test amplitude or custom amplitude for each decade Logarithmic or linear overlaid gain and phase plot, may also overlay with reference plots for cross comparison.
Test results saved in csv format for offline analysis Tracking gain and phase markers
Auto-scaled during test |
|
DISPLAY SYSTEM |
TFT LCD Type |
10.2" TFT LCD WVGA color display |
|
Waveform Update Rate |
200,000 wfms/sec max. |
|
Display Resolution |
800 horizontal x 480 vertical pixels (WVGA) |
|
Interpolation |
Sin (x)/x |
|
Waveform Display |
Dots, Vectors, Variable persistence(16 ms to 4 s), Infinite persistence,gray and color waveforms |
|
Display Graticule |
8 x 10 divisions |
|
Display Mode |
YT,XY |
|
INTERFACE |
RS-232C
USB Port |
DB-9 male connector
USB 2.0 high-speed host port x 1 ; USB high-speed 2.0 device port x 1 |
|
Ethernet Port |
RJ-45 connector, 10 M/100 Mbps with HP Auto-MDIX |
|
VGA Video Port |
DB-15 female connector, monitor output for display on VGA monitor |
|
Optional GPIB Module |
Fully programmable with IEEE488.2 compliance |
|
Go/NoGo BNC |
5 V Max/10 mA open collector output |
|
Kensington Style Lock |
Rear-panel security slot connects to standard Kensington-style lock |
|
Power Supply Receptacles |
±12 V/500 mA for current probe usage. 2 sets for 2 CH model; 4 sets for 4 CH model |
|
MISCELLANEOUS |
Operating |
0 °C to 50 °C, Relative Humidity ≤ 80 % at 40 °C or below ; ≤ 45 % at 41 °C to 50 °C |
|
Line Voltage Range |
AC 100 V to 240 V, 50 Hz to 60 Hz, auto selection. power consumption:100 W |
|
Multi-Language Menu |
Available |
|
On-Line Help |
Available |
|
Time Clock |
Time and date, provide the date/time for saved data |
|
Internal Flash Disk |
800 Mega bytes Single-Level Cell flash memory |
|
Installed APP |
Go/NoGo, DVM, DataLog, Digital Filter, Frequency Response Analyzer, Mask, Mount Remote Disk, Demo |
|
User Define Key |
User can select one of the several different preset functions as shortcut key |
|
DIMENSIONS & |
420(W) mm X 253(H) mm X 113.8(D) mm, Approx. 4.6 kg |
Note : Three-year warranty, excluding probes & LCD display panel.
|
|
 |
|
